1. PLC Touchscreen Automation
Optional PLC control system with interactive touchscreen for fully automated operation, real-time monitoring, and dynamic workflow visualization.
Recommended Size: 800 x 600 px or larger
Show front or 45-degree angle of the machine
Ideal for field maintenance of transformers in substations rated above 110kV, as well as deep purification of new oil, imported oil, transformer oil, and EHV transformer oil.
Widely applied in power plants, substations, grid companies, metallurgy, petrochemicals, machinery, and railway industries. Suitable for transformer vacuum filling, vacuum drying, and hot oil circulation.
Specially optimized for low atmospheric pressure and high-altitude regions, providing exceptional pumping speed and degassing efficiency.
Utilizes dual-stage high vacuum and high-speed 3D flash evaporation technology to rapidly remove moisture, gas, and volatile hydrocarbons from oil.
Significantly improves insulating oil performance by boosting flash point and breakdown voltage withstand strength.
Meets all technical requirements for transformer body evacuation and vacuum oil filling during installation or maintenance.
Adopts progressive multi-stage filtration to effectively eliminate mechanical particulates and fine impurities.
High dirt-holding capacity elements trap micro-particles and support repeated cleaning, reducing operational costs without secondary pollution.
Highly sensitive photoelectric level control detects foam and sets high/low limits to completely eliminate oil spraying issues.
Integrates automatic constant temperature control, level control, defoaming, and pressure protection.
Supports energized online oil purification with real-time status indicators on the control panel.
Engineered for low noise, easy operation, long maintenance intervals, and reduced power consumption.
Features interlocked protection across oil discharge, vacuum pumps, and heating systems to prevent misoperation.
Standardized with an imported foreline vacuum pump (naturally cooled) for high pumping speed and ultimate vacuum performance.
| Project | Parameter Name | Unit | 30 | 50 | 100 | 150 | 200 | 300 | 500 |
|---|---|---|---|---|---|---|---|---|---|
| Technical indicators of equipment | Flow | L/H | 1800 | 3000 | 6000 | 9000 | 12000 | 18000 | 30000 |
| working vacuum degree | pa | ≤100 | |||||||
| Working pressure | bar | ≥2 | |||||||
| Constant temperature control range | °C | 20 ∼ 80 | |||||||
| Power | 380V/50HZ (or according to user needs) | ||||||||
| Working noise | dB(A) | ≤ 74 | |||||||
| Heating power | KW | 35 | 60 | 80 | 85 | 90 | 95 | 100 | |
| Total power | KW | 40 | 55 | 86 | 90 | 95 | 98 | 105 | |
| Inlet and outlet pipe diameter | mm | 25 | 32 | 50 | 50 | 50 | 65 | 80 | |
| Equipment weight | kg | 600 | 800 | 1000 | 1300 | 1800 | 2100 | 2400 | |
| Overall dimension | Long (mm) | 1200 | 1250 | 1450 | 1600 | 1600 | 1800 | 1900 | |
| Wide (mm) | 1200 | 1250 | 1400 | 1600 | 1600 | 1700 | 1900 | ||
| High (mm) | 1700 | 1750 | 1800 | 2100 | 2150 | 2250 | 2300 | ||
| Oil treatment index | oil breakdown voltage | KV | ≥70 (gb/ t507) | ||||||
| Water content in oil | PPM | ≤ 3(GB/T7600) | |||||||
| Gas content in oil | % | ≤ 0.05(GB/T423) | |||||||
| Filtration accuracy | um | ≤ 1 | |||||||